HK DG4V5 G 12VDC

Magnetspule 12V DC für HKDG4V5

The product image may differ

Nominal voltage +/- 10 %

12 V DC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A

Average power consumption

38 W

Descargar PDF

Seleccione un modelo

Show table of articles

HK DG4V5 G 12VDC HK DG4V5 H 24VDC HK DG4V5 A 110VAC

Our customer service: +49-421-48907-766

Detalles del producto a

HK DG4V5 G 12VDC

Nominal voltage +/- 10 %

12 V DC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A

Average power consumption

38 W

Características

Customs tariff number

85059029

Product description

Notas

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
Tightening torque for attaching nuts of the solenoid coils: 3Nm

Indicación de pedido

A petición del cliente se pueden suministrar otros tipos de bobina